Eco-Friendly Resin Bundle Low Odor, High Quality 3D Prints

The demand for sustainable materials in Additive Manufacturing (AM) is rapidly increasing, leading to the development of specialized Eco-Friendly Resin Bundles. These materials are specifically formulated to reduce environmental impact and enhance the user experience without compromising the high quality of 3D Prints.

Discover Eco-Friendly Resin for sustainable 3D printing. Strong, safe, and low-impact material ideal for green, high-quality creations.

Related internal pages:

• experience-resin-bundle/
• anycubic-photon-mono-4/
• elegoo-saturn-2-resin-3d-printer-review/
• anycubic-photon-mono-m7-pro/
• anycubic-pla-filament/

What’s included：

Tough Resin Ultra： Low-Odor. This formulation is of low order and non-irritating, fostering a serene and comfortable printing environment. Its composition significantly reduces volatile organic compounds, making it an environmentally friendly and green choice.

Bio Resin： Eco-Friendly & Body-Friendly. Anycubic Bio Resin is formulated with bio-friendly ingredients, making it less irritating and odorless. This resin has successfully met the CEN Toy Safety Standard EN 71-3. It has obtained several essential biosafety certifications, including tests for in vitro cytotoxicity, skin sensitization tests, and animal irritation tests conducted through skin exposure.

Plant-based Resin： Truly Eco-friendly. Based on the market demand for green, safe, and eco-friendly resins. Anycubic Plant-based Resin was launched to meet users’ needs, and it is made from soybean oil extract, making it a truly environmentally friendly option.

Water-Wash Resin： No chemical solvents required — rinse with water for easy, eco-friendly use.

Instructions for Use：

（1）Before use：

• Shake the liquid resin before use.
• Clean the resin tank and the molding platform to ensure the bottom of the resin tank allows for light transmission.

（2）When using：

• Unscrew the cap and add it to the resin tank according to the equipment requirements.
• Select the correct print parameters and settings for printing.

（3）After use：

• After printing, please use the matching tools for post-processing, including blades, diagonal pliers, tweezers, containers, and gloves.
• Ethanol (≥95%), lactate, or isopropyl alcohol cleaning solution.

（4）Post-processing steps：

• A. Remove the printed model from the molding platform with a blade.
• B. Submerge the model in the cleaning solution, rinse or ultrasonically wash, then take it out and drain. ANYCUBlC Wash and Cure machines are suggested to ensure better results.
• C. Proper processing, such as removing support, polishing, coloring, etc.

Precautions：

• The ideal condition for storing uncured resin is a cool, dark place at room temperature, protected from light to avoid exposure to high temperatures or sunlight.
• The suggested operating temperature is 18-35 °C, and a low temperature may affect the printing effect. Therefore, the resin should be properly preheated before use (not exceeding 60°C).
• If the resin pigment settles, it can be used after stirring or shaking.
• To ensure the resin’s performance, please remove the model promptly after cleaning to prevent it from soaking in water for an extended period.
• To ensure the mechanical properties of the model, please perform post-curing on time after cleaning and drying.
• To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended：
  • 1. The intensity of the mercury lamp or LED light source is 5-10mW/m mW/m², and the duration is no more than 1 hour (self-regulation)
  • 2. The exposure time in the sun (summer) is around 1 hour
  • 3. Proximity or long-term exposure under strong light sources, such as high-power high-pressure mercury lamps, is prohibited
• 4. It is recommended to print in a dark room or be covered with a lid while printing, as resin is a photosensitive material.

FAQs